HAZWOPER 24-Hour Initial Training

What you actually cover

Every module, in order, with its runtime. 12 modules, 48 topics, 24 hr of instruction, and a final exam you pass at 80%. Nothing here is behind the paywall as a surprise.

1. 01HAZWOPER Scope, Tiers, and Eligibility

   2 hr

   Learners can distinguish the 24-hour tier from the 40-hour path and identify who decides the required level.

   • ·1910.120 scope
   • ·24-hour vs 40-hour
   • ·Employer tier decision
   • ·Field-experience requirement

2. 02Safety and Health Program, Responsible Personnel, and Communication

   2 hr

   Learners can identify responsible site personnel and explain how the employer safety and health program controls hazardous waste operations.

   • ·Site chain of command
   • ·Responsible personnel
   • ·Communication
   • ·Stop-work expectations

3. 03Hazard Recognition on Hazardous Waste Sites

   2 hr

   Learners can recognize chemical, physical, biological, radiological, environmental, and operational hazards that may appear on covered sites.

   • ·Hazard categories
   • ·Unknowns
   • ·Routes of discovery
   • ·Escalation triggers

4. 04Toxicology, Exposure Routes, PELs, and Symptoms

   2 hr

   Learners can explain dose, exposure routes, exposure limits, warning symptoms, and why symptoms do not replace monitoring.

   • ·Inhalation
   • ·Skin/eye contact
   • ·Ingestion/injection
   • ·PEL and published limits

5. 05Site Characterization, Hazard Assessment, and Control Zones

   2 hr

   Learners can describe site characterization, exclusion zones, contamination reduction zones, support zones, and changing conditions.

   • ·Characterization
   • ·Zone boundaries
   • ·Access control
   • ·Reevaluation

6. 06Air Monitoring Concepts and Interpreting Readings

   2 hr

   Learners can explain the purpose and limits of monitoring instruments and when readings should trigger stop-work or escalation.

   • ·Direct-reading instruments
   • ·Oxygen/LEL/toxic readings
   • ·Bump checks
   • ·Reading limits

7. 07Work Practices and Engineering Controls for Limited/Low-Exposure Work

   2 hr

   Learners can connect safer work practices and engineering controls to the limited task and characterized-area assumptions of the 24-hour tier.

   • ·Isolation
   • ·Ventilation
   • ·Dust/wet methods
   • ·Administrative controls

8. 08PPE Recognition and Limits for the 24-Hour Tier

   2 hr

   Learners can recognize PPE basics and understand that respirator use moves the learner out of this 24-hour-only path unless upgraded.

   • ·Level D boundary
   • ·Non-respiratory PPE
   • ·Level C warning
   • ·Employer selection

9. 09Decontamination Concepts

   2 hr

   Learners can describe contamination control, decontamination corridor logic, doffing discipline, and when decon support must escalate.

   • ·Contamination reduction
   • ·Doffing sequence
   • ·Tools and equipment
   • ·Waste handling

10. 10Medical Surveillance, Exposure Reporting, and Stop-Work Expectations

    2 hr

    Learners can explain medical surveillance concepts, exposure reporting, symptom reporting, and why stop-work is protective.

    • ·Medical program
    • ·Exposure signs
    • ·Incident reporting
    • ·Retraining triggers

11. 11Site Safety and Health Plan / HASP / SSHP

    2 hr

    Learners can use the site safety and health plan as the site-specific operating document and recognize what online training cannot replace.

    • ·HASP contents
    • ·Emergency procedures
    • ·PPE and monitoring plans
    • ·Site-specific briefing

12. 12Scenario Integration, Field-Experience Handoff, and Completion Boundary

    2 hr

    Learners can apply the 24-hour boundary to realistic scenarios and explain the supervised field-experience and employer-competence requirements.

    • ·Tier decision scenario
    • ·Low-exposure scenario
    • ·Upgrade trigger
    • ·Certificate boundary

13. 13Final exam

    pass at 80%

    40 questions drawn from everything above. Your certificate is issued the moment you pass.

What this training is built on

The specific provisions this course teaches to. We publish them so you can check the course against the rule rather than take our word for it.

• 29 CFR 1910.120(e)(3)(ii): occasional limited-task workers receive a minimum of 24 hours of off-site instruction and one day of supervised field experience.
• 29 CFR 1910.120(e)(3)(iii): workers in fully characterized low-exposure areas receive a minimum of 24 hours of off-site instruction and one day of supervised field experience.
• 29 CFR 1910.120(e)(2): training must cover names of responsible personnel, site hazards, PPE, work practices, engineering controls, medical surveillance, and the site safety and health plan.
• 29 CFR 1910.120(e)(3)(iv): workers who become general site workers or need respirators require an additional 16 hours and two days of field experience to total the 40-hour level.
• 29 CFR 1910.120(e)(4): on-site supervisors need the same initial training level as the employees supervised plus at least eight additional hours of specialized supervisor training.