Online compliance awareness training
Ladder Safety
Ladder Safety training for construction, maintenance, facilities, warehouse, telecom, HVAC, electrical, and general industry workers.
63 minutes3 modules80% passing scoreInstant certificate
- Three ladder safety modules
- 3-question quiz after each module
- 10-question final assessment
- Instant certificate of completion
Already bought this? Go straight to the course
What you actually cover
Every module, in order, with its runtime. 3 modules, 15 topics, 1 hr 3 min of instruction, and a final exam you pass at 80%. Nothing here is behind the paywall as a surprise.
01Choosing the Right Ladder
18 min- Course Introduction
- Pick the ladder for the job
- Duty rating and load
- Material and electrical exposure
- Module 1 scenario
02Inspection and Setup
23 min- Inspect before use
- Tag and remove defects
- Set the angle and landing
- Footing and surroundings
- Module 2 scenario
03Working Safely From a Ladder
22 min- Three points and facing the ladder
- Overreaching and side force
- Top step, top cap, and misuse
- Weather, surfaces, and stop points
- Module 3 scenario
04Final exam
pass at 80%10 questions drawn from everything above. Your certificate is issued the moment you pass.
What this training is built on
The specific provisions this course teaches to. We publish them so you can check the course against the rule rather than take our word for it.
- 29 CFR 1926.1053(a)(27) side rails extend at least 3 feet above upper landing, or secured access with grasping device
- 29 CFR 1926.1053(b)(5)(i) 4-to-1 pitch for non-self-supporting ladders
- 29 CFR 1926.1053(b)(4) ladders used only for designed purpose
- 29 CFR 1926.1053(b)(15) ladder inspection for visible defects periodically and after incidents affecting safe use
- 29 CFR 1926.1053(b)(16) defective ladders marked or tagged and withdrawn from service
- 29 CFR 1926.1060(a) ladder training by a competent person in construction
- 29 CFR 1910.23 general industry ladder requirements
- 29 CFR 1910.30 training before exposure by a qualified person
Train one person or your whole crew
Volume pricing is applied automatically as you add seats, and you get a roster showing exactly who has finished and who has not.