Walking, Walking Surfaces, Trip & Slip Awareness
OSHA Compliant Slip, Trip & Fall Prevention Training
Comprehensive OSHA-compliant training on walking and working surface safety, slip/trip/fall hazard recognition, prevention strategies, and incident reporting. Covers 29 CFR 1910 Subpart D requirements. Earn your certification instantly upon completion.
Who This Training Is For
- All employees who walk or work on any surface
- Warehouse and manufacturing workers
- Office and administrative staff
- Healthcare and retail workers
- Maintenance and custodial personnel
- Supervisors responsible for workplace safety
This Training Is NOT For
- Fully remote workers who never visit a worksite
- Personnel already certified in current calendar year
When Is This Training Required?
Before working on any walking or working surface. Refresher training recommended annually or when workplace conditions change.
Regulation
Course Curriculum
Part 1: Hazard Awareness & Identification
30 Minutes • Modules 1-2
Introduction to Walking & Working Surface Safety
Understand OSHA 29 CFR 1910 Subpart D requirements, workplace injury statistics, the scope of slip/trip/fall hazards, and employer/employee responsibilities.
Identifying Slip, Trip & Fall Hazards
Learn to recognize environmental, behavioral, and surface-related hazards including wet floors, uneven terrain, poor lighting, obstacles, and improper footwear.
Part 2: Prevention, Response & Compliance
30 Minutes • Modules 3-4
Prevention Strategies & Best Practices
Master proven prevention techniques including housekeeping standards, signage, engineering controls, proper footwear selection, and safe walking practices.
Incident Response, Reporting & Final Assessment
Learn proper incident response, OSHA reporting requirements, workers compensation basics, return-to-work programs, and complete the comprehensive 10-question final assessment.
Understanding OSHA Walking Surface Requirements
Key regulatory references for workplace walking and working surface safety
"Each employer shall ensure that each walking-working surface is kept in a clean, orderly, and sanitary condition, and in good repair... free of hazards such as sharp or protruding objects, loose boards, corrosion, leaks, spills, snow, and ice."View full regulation at eCFR.gov →
Slip Prevention
Maintain slip-resistant surfaces, clean spills immediately, use warning signs, and select proper footwear for work conditions.
Trip Prevention
Keep walkways clear, secure cables and cords, repair uneven surfaces, mark elevation changes with high-visibility markings.
Fall Prevention
Install guardrails and handrails, use fall protection systems, maintain adequate lighting, and inspect ladders before use.
According to the Bureau of Labor Statistics, slips, trips, and falls account for over 200,000 workplace injuries annually and are the second leading cause of workplace fatalities. The average cost per incident exceeds $48,000.
Frequently Asked Questions
Who needs slip, trip, and fall prevention training?
All employees who walk or work on any surface in the workplace should receive this training. This includes office workers, warehouse staff, manufacturing employees, healthcare workers, retail workers, and anyone who walks through their workplace — which is virtually everyone.
Is walking surface safety training required by OSHA?
Yes. OSHA 29 CFR 1910 Subpart D requires employers to maintain safe walking and working surfaces and to train employees on hazard recognition and prevention. The General Duty Clause also requires employers to provide workplaces free from recognized hazards.
What are the three types of hazards covered?
The course covers: (1) Slip hazards — caused by insufficient friction between footwear and surface (wet, oily floors), (2) Trip hazards — caused by obstacles in the walking path (cables, uneven surfaces), and (3) Fall hazards — caused by loss of balance leading to falls from heights or same level.
What is the most effective way to prevent slips and falls?
Good housekeeping is the single most effective prevention method. This includes keeping walkways clear, cleaning spills immediately, securing cables, maintaining adequate lighting, and using warning signs. Proper slip-resistant footwear is also critical.
How long do I have to complete the course?
You have lifetime access. Complete it at your own pace — most users finish in a single 1-hour session. Your progress is saved automatically so you can pause and resume at any time.
Will I receive a certificate?
Yes. Upon successful completion of all 4 modules and quizzes (70% minimum passing score), you receive an instant downloadable certificate suitable for compliance audits and employer documentation.